3. Inspection of operation
3.5 RPM/RCF Input
1.In standby mode, press Setup/Enter (
2. Press Left (
) or Right (
3. Press Up (
) or Down (
4. Press the Setup/Enter (
3.6 Time Input
1.In standby mode, press Setup/Enter (
2. Press Left (
) or Right (
3. Press Up (
) or Down (
▶You can set up time up to 99min 59sec.
4. Press the Setup/Enter (
3.7 Accel/Decel Setting
1.In standby mode, press Setup/Enter (
2. Press Left (
) or Right (
3. Press Up (
) or Down (
▶Accel/Decel step is 1 ~ 5.
▶Step 1 is the slowest and step 5 is the fastest.
▶Decel step as 0 means natural brake.
4. Press the Setup/Enter (
) button.
) button to change to rpm or rcf mode
) button to input the setting value.
) button to save the settings.
) button.
) button to move to TIME position.
) button to change a set value.
) button to complete.
) button.
) button to move to Accel/Decel position
) button to select a set value.
) button to complete.
www.ihanil.com
11
Need help?
Do you have a question about the Smart R17 and is the answer not in the manual?