Advertisement
3.2.17 Removing the Cooling Fan Optical Head Unit Light Guide Unit
The step explained
Prerequisite condition:
3.2.13 and 3.2.15 must have been completed.
3.2.11,
Coolig fan
(1) Cooling fan
1. Remove two cooling fan mounting screws and remove the cooling fan.
Screw:
Caution:
When installing the cooling fan, place it so that the label side faces down (on the
aluminum die-cast side) and that its cable is oriented as shown in the photo. Clean the
cooling fan until it is free of dust and dirt.
in Subsections 3.21, 3.24, 3.2.5, 3.2.10,
Figure
30
P/N1032848 (mounting torque:
3-22
=
Advertisement
