Advertisement
5. Data transfer
This menu option programs the settings into the flash ROM in the LCP. The set values
will not be saved in the LCP unless this menu is executed.
option after making any adjustment using the image adjustment program.
(1) Type 5, "Data transfer," at the keyboard.
(2) Make sure that the top line of following messages appear on the monitor screen.
C reat New
File
File
<Flash
ROM
P a r i t y : N o n e
Stop
Data
Length:8
Down load
GAMMA
Are you sure? [y/n] Y
Flash
download
(3) Type
at the keyboard if all settings are OK. The image adjustment program
starts programming the set values into the flash ROM in the LCP.
Type
to reexecute adjustments to brings about the main menu.
HEX
file?
name:004
Data
download
Area :GAMMA
was
successfull.
Figure 5-23
5-17
Be sure to run this menu
[Y/N]
Y
Transfer
program>
Advertisement
