Advertisement
3.2.19 Removing Light
Prerequisite condition: The step explained in Subsections 3.2.1, 3.2.4, 3.25, 3.2.10,
3.2.11, 3.2.12, 3.2.13, 3.2.15, and 3.2.16 must have been completed.
Light valve R
Remove three light valve mounting screws and remove the light valve.
Screw:
sems
over
Caution:
1) Since the light valves are highly sensitive to static electricity, never place them on a
vinyl, nylon, or other sheet that is easily charged.
2) Before installing the light valves, clean their screen and make sure that they are free
of dirt.
3) The light valve can be identified with the label on a FPC cable.
Light valve R: red label
Light valve B: blue label
Light valve G: no label
Valves R, G, and
Light valve G
Figure
33
PIN1021821 (mounting torque: over
3-25
Light valve B
=
Advertisement
