Advertisement
(Continued from the previous
strap
F
Scr
2.
Remove the FG strap mounting screw on the power supply unit.
Screw:
Sems P/N 1033025 (mounting torque:
Remove seven mounting screws from the main board block. (one of the screws
3.
mounts the FG strap besides)
Six Screw:
One Screw:
4.
Grasp the main board block on the left side (the portion indicated by the arrow in the
photo and disconnect the connector from the interface board assembly.
Caution:
Never apply any mechanical stress to the board to avoid malfunction caused by wire
breaking or solder flaking.
Figure
Sems P/N1033122 (mounting torque:
P Tight P/N1021823 (mounting torque:
Screw
=
=
=
Advertisement
