Advertisement
32.6 Removing the Safety Switch
Prerequisite condition: The step explained in Subsections 3.2.1 must have been
completed.
Safety
1. Disconnect the Fast-on tab terminals of the two cables connected to the safety
switch.
2. Remove two mounting screws from the safety switch and detach the safety switch.
Screw:
P-Tight
Caution:
When removing the Fast-on terminals, do not apply excessive force to the terminals on
the safety switch in the horizontal or vertical direction.
The polarity of the cables (blue/white) is insignificant; connect them to any terminals
on the safety switch.
Figure
15
(mounting torque: 6.0 kg.cm = 5.2
3-l 1
Advertisement
