Advertisement
3.2.13 Removing the Lamp Outer Housing Unit
Prerequisite condition: The step explained in Subsections 3.2.1, 3.2.6 must have been
completed.
1. Remove two lamp air guide mounting screws to detach the lamp air guide.
screw:
P-Tight: P/N1021824 (mounting torque:
2. Remove the lamp outer housing unit mounting screws and remove the lamp outer
housing unit.
screw:
P/N1021824 (mounting torque:
Caution:
The inside of the lamp outer housing is susceptible to dust, if necessary clean there
before installing it.
The lamp outer housing is heated for a while after the power is turned off. Remove the
housing after it completely cools down.
Lamp air
Figure
rew
Figure
24
3-18
=
=
Advertisement
