Advertisement
32.20 Removing the Prism Unit
Prerequisite condition: The step explained in Subsections 3.2.1, 3.2.4, 3.25, 3.2.10,
3.2.11, 3.2.12, 3.2.13, 3.2.15,
Figure
Remove four FA plate mounting screws.
Screw:
2. Remove six screws (two for each of R/G/B bulbs) mounting the light bulbs to the
head unit to detach the FA adjust fixing plate with the bulbs.
Screw:
3. Remove three prism mounting screws and remove the prism.
Screw:
Caution:
1) When installing, clean and make sure that the FA adjust fixing plate and prism are
free of dirt.
2) When installing the prism, align the bosses on the prism bottom plate with the holes
in the frame before securing the mounting screws.
and 3.2.19 must have been completed.
34
PIN1021821 (mounting torque:
PIN1021821 (mounting torque:
PIN1025172 (mounting torque:
3-26
Screw
Figure
35
=
=
=
Advertisement
