Advertisement
2. Ghost adjustment
(1) Type 2, "16 redscale," at the keyboard.
(2) Make sure that the following
screen (on the
dark patterns appear on the left side and brighter patterns on the
(3) Use the right and left arrow (cursor control) keys so that the border line of each
grayscale appears thinnest (least overlap
As you press the left arrow (cursor control) key, an adjustment value from 0 to
3 appears at the lower left corner of the monitor.
Press the return key and make sure that 16-greenscale patterns appear on the
(4)
projection screen.
In the same way as in step
(5)
appears thinnest.
Press the return key and make sure that 16-bluescale patterns appear on the
(6)
projection screen.
In the same way as in step
(7)
appears thinnest.
screen is projected on the LCP projection
pattern section, displayed on top portion of the screen,
Figure 5-20
borderlines).
adjust so that the border line of each grayscale
adjust so that the border line of each grayscale
5-14
side).
a d j u st m e n t me n u
Advertisement
