Advertisement
adjustment program menu>
After the start-up operation, following display appear on the monitor screen.
Image Adjustment RS-353 Verl
0 Initialization
Flicker Adjustment
2 Ghost Adjustment
3 Sub Contrast Adjustment
4 Gamma Revise
5 Data Transfer
6 ROM Initialization
9 END
Select the number
1 Windows95 system
(1) Insert the floppy disk containing the image adjusting program into the FDD.
(2) Select the "My computer" from the initial display on the screen.
(3) Make sure the screen display of my computer,then select the "3.5 inch
(4) Make sure the screen display of
(5) Make sure the screen display of
(6) Make sure the screen display of
MS-DOS or Windows3.1 system
2
(1) Make sure that the prompt
the MS-DOS prompt from the program manager or exit Windows and display the prompt
the
appear on the screen instead of
(2) Type
then press enter
(3) Make sure that the prompt
(4) Type "cd
then press enter key.
(5) Make sure that the prompt
(6) Type "cd
then press enter
(7) Make sure that the
(8) Type
then press enter
SEIKO EPSON
Figure 5-l 8
object, then select it.
object, then select it.
then select it.
appears on the monitor screen. If Windows 3.1 is running, select
[Enter])
appear on the monitor screen.
cd
appear on the monitor screen
appear on the monitor screen.
type "cd
then press enter key.)
[Enter])
Advertisement
