Advertisement
for focus adjustment
1 .Tum off the LCP power switch.
two mounting screws from windbreak then remove
plate.
all connectors
from driver board.
seven mounting screws from the driver board then grasp the driver board
and pull out the board.
four speaker uint mpunting screws and remove both speaker unit.
two board retaining plate fixing screws and remove the board retaining
plate.
the adjustment tool. (Perform three connectors connection)
on the power switch then ensure the white raster appear on the screen.
(If the white raster does't appear on the screen, please change the switch setting
on the adjustment tool.)
Figure 5-8
5-4
Advertisement
