Advertisement
0.
Type 0 "PAUSE KEY
this menu. When you execute this menu program issue the command to the LCP in
order to change the operating mode from normal to adjustment mode.
Preceding to the adjustment
1. Flicker adjustment
(1) Type
(2) Make sure that the following screen is projected on the LCP projection
the
pattern section displayed on top portion of the screen, dark patterns
appear on the left side and brighter patterns on the right side).
k e r
L 0 R
D
C 0
C h a n g e
d a t a u s i n g
L e f t A r r o w K e y : d o w n
S e l e c t
E n t e r
Arrow key generate the plus or minus value by one
(3) Use the right and left arrow (cursor control) keys to obtain the display state in which
the flickers are minimum.
As you
press the left arrow (cursor control) key, an adjustment value from
appears at the lower left corner of the monitor screen.
(4) Press the return key and make sure that 16-greenscale patterns appear on the
projection screen.
(5) In the same way as in step
minimum.
(6) Press the return key and make sure that
projection screen.
(7) In the same way as in step
minimum.
message apper on the monitor screen after the completion of
menu should be executed.
at the keyboard.
a d j u s t m e n t * *
R i g h t A r r o w K e y : u p
K e y : s e t
Figure 5-I 9
find the display state in which the flickers are
find the display state in which the flickers are
5-13
screen (on
for previous setting value.
patterns appear on the,
to
Advertisement
