Download Print this page

Epson RS-353 Service Manual page 46

Advertisement

2.10 LIGHT
LIGHT
The light valve R/G/B each is a high density liquid crystal panel of 307,200 pixels (liquid
crystal shutter) in 26.9
level of the liquid crystal shutter in 8 degrees from the fully closed condition (no
transmission of light)
to
the
three light valves (R/G/B) enables to indicate full color
Each light valve which has its own part number is incompatible with others.
Consequently, their part number differs as summarized in the table given below.
NAME
PART NO.
LIGHT VALVE G 1021660 (1028151)
LIGHT VALVE B 1022063
LIGHT VALVE RI1021674 (1027964)
Light valve
Light valve R '
Since the light valve is a liquid crystal shutter, they have the following specific features
according to ambient temperature.
At low temperature Reaction speed is fast.
Afterimage, light contrast, or thinner color may occur.
At high temperature: Reaction speed is activated.
Whole image seems dark.
R/G/B to PRISM UNIT
20.2 mm(H). It can control the condition of the twist
fully open condition (no shut out of light). Combination of
I
Since the Light Valve G does not have
the position adjust plate. to define
The Light Valve B has a blue label on
its FPC cable.
Light Valve R has a red one.
B
Figure
20
2-16
colors).
REMARKS

Advertisement

loading