Epson Projector Control User’s Guide ® The Epson Projector Control software lets you control the projector over a wired or wireless network from a computer running Windows ® 2000 SP4, XP SP2 32-bit, or Windows Vista ™ 32-bit. It enables you to perform operations, such as turning the projector on/off and switching sources, from your computer without using the projector’s remote control.
IP address. 5. Enter the Web Control password or the password that was set using the Epson EMP Monitor Utility in the Monitor Password field. If you didn’t set a password, don’t enter anything. 6. Uncheck the boxes for the buttons that you do not want to display in Advanced and Simple Mode.
Using Epson Projector Control There are two modes for the main screen, Advanced Mode and Simple Mode. Choose Simple Mode to minimize the number of button options. Advanced Mode Simple Mode See the tables below for a list of button functions.
Turns A/V Mute on/off on the projector. Freeze Turns the Freeze function on/off on the projector. Volume – Turns the volume down on the projector. Volume + Turns the volume up on the projector. Switches between Advanced Mode and Simple Mode. Using Epson Projector Control...
Epson is a registered trademark of Seiko Epson Corporation. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. © 2007 Epson America, Inc.