Advertisement
initialization (Default value setting)
6. ROM
This menu option initializes all the settings stored in the flash ROM in the LCP. When
this menu option is executed, all of previous settings are cleared and default values are
stored into the flash ROM.
* Do not run this menu option at site unless specifically so specified.
If you inadvertently type 6, "Set ROM Initialization," at the keyboard, type
following messages appear:
Ini tial i zati on
Port
9600bps
Baud rate
Parity None
Stop bit
1
Data Length
Down Load Aria : GAMMA
GAMMA File GMINT.GAM
Are you sure? [y/n]
9. End
Type 9 at the keyboard to terminate the image adjustment program-.
The prompt "A:\" will appear on the monitor screen.
Figure 5-24
5-18
until the
Advertisement
