Table Of Contents - Epson RS-353 Service Manual

3.2 Disassembling and Assembling the LCP Main Unit
The flowchart for disassembling the LCP main unit is shown below.
reassemble the dismantled LCP parts in the reverse order of disassembly, unless
specifically specified, this manual contains no reassembly procedure. Detailed
descriptions of the disassembly procedures are
3.2.21.
Upper case
Lamp inner
housing (3.2.1)
Main board
(3.2.4)
Projection lens Cooling fan/Optical head unit
unit (3.2.16)
Upper light
guide (3.2.18)
Light valve
RGB (3.2.19)
given
Air filter frame
(3.2.3)
(3.2.2)
Handle Exhaust fan
(3.2.1) (3.2.5)
Interface unit
/Light guide unit (3.2.17)
Inlet unit
(3.2.21)
Prism unit
Figure 1
3 - 3
Since you can
in Subsections 3.2.1 through
Safety switch
(3.2.6)
(3.2.20)