Epson RS-353 Service Manual page 70

3.2.15 Removing the optical block
Prerequisite condition: The step explained in Subsections 3.2.1, 3.2.4, 3.25, 3.2.10,
3.2.11, 3.212 and 3.2.13 must have been completed.
1. Removing four optical block mounting screws.
Screw: Bind P Tight: P/N1021825 (mounting torque:
2. Pull the straight up from the lower case.
Screw
Screw
Figure 27
Figure 28
3-20
=