Endress+Hauser Mycom S CLM 153 Operating Instructions Manual page 74

6 Commissioning
⇒
74
6.4.19 Diagnosis
To enter the menu, proceed as follows:
CODE CHOICE
(default = bold)
U Error list
Error log
Operation log
Calibration log
service
Service:
Y Factory settings
Simulation
Instrument check
Reset
DAT handling
Instrument version
ChemoClean
Factory function
⇒
INFO
Error list: Displays the current active errors.
(Complete error list with description s. page 88)
Error log: Lists the last 30 signalled errors with date and
time.
Operation log (service code necessary): Lists the last
30 registered operating steps with date and time.
Calibration log: Lists the last 30 calibrations undertaken
!
with date and time.
Note!
• Use the arrow keys to scroll through the lists.
• Leave the lists by pressing "E".
Selection for service diagnosis
Factory settings: Different data groups can be reset to
the factory settings.
Simulation: The transmitter behaviour can be simulated
after entering various parameters.
Instrument check: The instrument functions
(display, keys, etc.) can be tested individually.
Reset: Device reset ("warm start")
DAT handling: Copy data into/out of the DAT module.
Instrument version: Device internal data e.g. serial
number can be queried.
ChemoClean (only, if the complete ChemoClean
function is activated): Inspecting programmes, inputs,
mechanics.
Factory function: Reset counter, write access
Mycom S CLM 153
Endress+Hauser