Endress+Hauser Mycom S CLM 153 Operating Instructions Manual page 71

Mycom S CLM 153
Endress+Hauser
CODE CHOICE
(default = bold)
PAA2 01 Water
02 +Cleaner
03 Water
04 Rep. cleaning
PAA3 0010 s
(0 ... 9999s)
PAA4 Repeat x number of
times
00
(0 ... 10)
Copy day:
PAB1 Tuesday
Wednesday
...
Sunday
User programme: (Programme Editor)
PAB1 User prog. 1
PAB1 Edit
Insert template
Enable
Disable
Rename
Edit:
PBA1 01
02
....
INFO
0 s Select programme blocks
30 s The times for individual programme steps can be
30 s individually adjusted here. Select a block for editing by
0x pressing "E".
+Cleaner: Cleaner is conveyed in addition to water.
Rep. cleaning: Number of repetitions of the previous
!
steps 01 ... 03
Note!
• When you change one of this programme blocks the
changes will affect every cleaning.
• Leave this selection by pressing "PARAM".
Water / cleaner:
Enter the time during which the valve remains open to
allow the conveyance of water or cleaner.
Repeat cleaning
How often should the previous step (cleaner or water)
be repeated?
? = Monday
Select the day
!
to which you want to copy Monday (example).
Note!
Danger of data loss. When copying one day to another,
the cleaning programmes of the target day are
overwritten.
Select user programme
With ChemoClean there is one user programme
available.
Select edit function
Insert template: An installed programme (e.g. Clean)
!
can be inserted into the user programme.
Note!
• After a programme is disabled, it can be re-enabled
at any time.
• Leave this item by pressing "PARAM".
Select rows
The row with the selected position number can be
!
edited with "E".
Note!
Leave this selection by pressing "PARAM".
6 Commissioning
71