Endress+Hauser Mycom S CLM 153 Operating Instructions Manual page 115

Mycom S CLM 153
DIAG
Select
(
Factory settings,
simulation, instrument
check, Set up 2
see above)
Instrument version
Chemoclean
(only if acitvated)
Reset count
Endress+Hauser
Controller: Basic module:
SW version: ----
SW version: 1.0
HW version: ----
HW version: ----
Serial nr.:
Serial nr.:
Card ID:
Card ID: MC3
Status of plant Note:
Interrupt running
Automatic off program by
Cleaning trigger off pressing E-key!
Ext. control off Continue: E
Cancel: PARAM
Reset counter Write count to
(only triggered EEPROM
by Watchdog)
0 xx
DC DC:
Transmitter 1/2:
SW version: ---- SW version: ----
HW version: ---- HW version: ----
Serial nr.:
Serial nr.:
Card ID:
Card ID:
Select Test Info field: Status of
external inputs
Ext. inputs Start no Prog.
Auto Stop off
Wait-Trigger off
Ass. meas. off
Ass. Service off
Select mechanics:
Water
Hardware
Cleaner
Water+Cleaner
Relay:
Serial number:
SW version: ---- 12A34B56C78
HW version: ----
Serial nr.:
Card ID:
0...9; A...Z
Back to
return field
Info field: Status of
plant
Automatic off
Cleaning trigger off
Ext. control off
»Return field«:
press the PARAM
= Code entry required
key to return to
the highlighted
fields.
11 Appendix
Order code:
CLM 153-
0...9; A...Z
115