Wi-Fi Tcp Communication Card - Ingeteam INGECON SUN STORAGE 1Play Installation And Operation Manual
Hide thumbs
Also See for INGECON SUN STORAGE 1Play:
- Technical manual (29 pages) ,
- Installation and configuration manual (23 pages) ,
- Quick start manual (11 pages)
Table of Contents
Advertisement
Ingeteam
16.2.3. Wi-Fi TCP communication card
The Wi-Fi TCP communication card is installed inside the unit to provide a wireless network interface.
Follow the steps below to connect the communications card:
1.
Connect the communication card in the J11 and J12 connectors of the control card.
2.
In the lower part of the inverter, remove the cable gland for the Reset button and install said button (see
"2.7. Description of cable inlets").
3.
Install the antenna in the dedicated cable gland (see "2.7. Description of cable inlets").
4.
Connect the Reset button and the antenna to the communication card. Use the provided extension cable
for the Reset button.
48
Connecting optional accessories
J11
J12
ABH2015IQE01_ - Installation and Operation Manual
Advertisement
Table of Contents
