Unit Description; Electrical Diagram Of The System; Types Of Hardware - Ingeteam INGECON SUN STORAGE 1Play Installation And Operation Manual

Ingeteam

2. Unit description

The INGECON SUN STORAGE 1Play is a dual input DC (photovoltaic and battery) single-phase inverter capable of
working in off-grid mode. This equipment is used in stand-alone installations.
Stand-alone installations
A stand-alone installation is a system disconnected from the distribution grid that provides AC power to a set of
consumers.
INFO
For more information about this type of installation, see the "Technical guide for installations with
INGECON SUN STORAGE 1Play" available on the Ingeteam website.

2.1. Electrical diagram of the system

INGECON SUN STORAGE 1Play
A. Consumption grid relay.

2.2. Types of hardware

In the INGECON SUN STORAGE 1Play there are two distinct types of hardware, type A and type B. Both have the
same functionalities, but the type of hardware must be identified in order to perform the connections.
An easy way of identifying it is checking the number of PV array inlets in the cabling entrances in the lower part of
the unit. Hardware type A has two pairs of inlets, and hardware type B has one pair.
Hardware type A, two pairs of inlets
12
A B
J56
B. Auxiliary generator relay.
Hardware type B, one pairs of inlets
J55
ABH2015IQE01_ - Installation and Operation Manual
Unit description