Ingeteam INGECON SUN STORAGE 1Play Installation And Operation Manual page 58

Ingeteam
Battery
Setting
VBAT Voltage (V) in the battery bank measured by the inverter.
IBAT Current (A) in the battery bank measured by the inverter. Positive for discharge, negative
for charge.
SOC Estimation of the lead-acid battery bank state of charge (%). For Li-Ion batteries it will
display the data received by the BMS.
STATUS Status of the battery bank. The following states may be shown: Stand-by, Discharge,
Charge, Absorption, Flotation or Equalization.
TEMP Battery bank temperature (ºC). In the case of the lead-acid batteries, a PT-100 sensor must
be installed.
BMS battery manager
Setting
VBAT Voltage (V) of the Li-Ion battery.
IBAT Current (A) of the Li-Ion battery. Negative for discharge, positive for charge.
SOC State of charge of the Li-Ion battery (%).
I MAX CHARGE Maximum charge current (A) of the Li-Ion battery.
I MAX DISCHARGE Maximum discharge current (A) of the Li-Ion battery.
VBAT CHARGE Charge voltage (V) of the Li-Ion battery.
VBAT DISCHARGE Discharge voltage (V) of the Li-Ion battery.
SOH Health status (%) of the Li-Ion battery.
TEMPERATURE Internal temperature (ºC) of the Li-Ion battery.
COMM STATUS CAN communication status with the Li-Ion battery. The following states may be shown: OK
or ERROR.
Photovoltaic
Setting
Voltage (V) of the PV array. If the PV array is not available but the inverter has started, the
VDC
voltage (V) of the internal DC bus is displayed.
IDC Current (A) of the PV array.
PDC Power (W) of the PV array.
Inverter
Setting
VAC Voltage generated by the inverter (V).
IAC Current through the inverter (A).
FAC Frequency generated by the inverter (Hz).
PAC Active power through the inverter (W).
STATUS Inverter status. The following states may be shown: Disconnected, Connected, or Waiting
the connection with the genset (waiting time according to selected regulations).
Genset
Setting
VAC Auxiliary genset voltage (V).
IAC Auxiliary genset current (A).
58
Description
Description
Description
Description
Description
ABH2015IQE01_ - Installation and Operation Manual
Display control