Ethernet Tcp Communication Card - Ingeteam INGECON SUN STORAGE 1Play Installation And Operation Manual
Hide thumbs
Also See for INGECON SUN STORAGE 1Play:
- Technical manual (29 pages) ,
- Installation and configuration manual (23 pages) ,
- Quick start manual (11 pages)
Table of Contents
Advertisement
Connecting optional accessories
16.2.2. Ethernet TCP communication card
The Ethernet TCP communication card is installed inside the unit to provide an Ethernet network interface.
Follow the steps below to connect the communications card:
1.
Connect the communication card in the J11 and J12 connectors of the control card.
2.
Insert the wiring to the unit through the cable inlets provided in the lower part of the inverter (see "2.7.
Description of cable inlets").
3.
Connect the Ethernet (A) cabling to the communication card.
ABH2015IQE01_ - Installation and Operation Manual
A
Ethernet TCP communication card
J11
J12
Ingeteam
47
Advertisement
Table of Contents
