Reference Material; Best Practices For Cleaning Your Extron Products; Network Port Requirements And Licensed Third-Party Software Used By The Touchpanels - Extron electronics TLP Pro 525 Series User Manual

Reference Material

This section describes:
•
•
•
•
•
•
•
Best Practices for Cleaning Your Extron
Products
Depending on the device, application, and location,
there may be times when it becomes necessary
to clean your Extron product. Frequently touched
devices, such as touchscreens and button panels,
require regular cleaning to ensure their surfaces
remain sanitary. Plastic surfaces and cosmetic
finishes can be damaged by long term exposure
to chemicals. Therefore, Extron recommends the
following guidelines when cleaning our products.
All Extron products can be safely cleaned with:
1.
2.
Regardless of the device, it is important to follow these general guidelines when cleaning:
1.
2.
3.
4.
Your health and safety are our top priority. Keeping devices clean, especially those in high‑traffic
environments and high‑use applications, is a crucial step in minimizing the spread of infections.
Please contact us if you have any questions about the guidelines outlined in this section or if you
have a question about cleaning a specific Extron product.
Network Port Requirements and Licensed Third-Party Software Used
by the Touchpanels
For information about network port requirements and licensed third‑party software for all the
touchpanels described in this guide, please refer to the Pro Series Control Product Network
Ports and Licenses Guide, which is available at www.extron.com.

Best Practices for Cleaning Your Extron Products

Network Port Requirements and Licensed Third-Party Software Used by the
Touchpanels
Digital I/O Port Cases
Reset Modes
Secure Sockets Layer (SSL) Certificates
IEEE 802.1X Certificates
SNMP
70% concentration or higher isopropyl alcohol
Disinfectant cleaners that:
Are non‑ammonium based (for example, contains no ammonium chloride)
•
Contain 2% or less sodium hypochlorite (for example, 2% bleach, 98% water)
•
If possible, unplug the device.
Spray the cleaner on a lint‑free cloth until the cloth is damp.
Do not spray the cleaner directly onto the product.
Gently clean the product surface using the cloth.
TLP Pro 525, 725, and 1025 Series Touchpanels • Reference Material 31