Mounting The Tlp Pro 525M, 725M, And 1025M; Mounting To A Wall Box Or Junction Box - Extron electronics TLP Pro 525 Series User Manual

Mounting the TLP Pro 525M, 725M, and 1025M

Mounting to a Wall Box or Junction Box

Some local building codes require the touchpanel to be mounted in a junction box. Junction
boxes or wall boxes must be purchased separately.
NOTES:
NORTH
AMERICAN
MK/WALL
Figure 22.
• The TLP Pro 525M and TLS 525M touchpanels mount to a 1‑gang junction box and
have their own mounting plate (see figure 22, top).
installed so that the long side is horizontal. EU or MK 1‑gang junction boxes should be installed
in the standard orientation.
• The TLP Pro 725M, TLS 725M, TLP Pro1025M, and TLS 1025M touchpanels mount
to a 2‑gang junction box. All four of these models use the same mounting plate (see
figure 22, bottom).
EU/MK
WALL
WALL
NORTH
AMERICAN
EU
EU
NORTH
AMERICAN
Mounting Plates for TLP Pro 525M (top) and TLP Pro 725M and 1025M (bottom)
TLP Pro 525, 725, and 1025 Series Touchpanels • Mounting
The US 1‑gang junction box should be
MK EU/MK
WALL
WALL
MK
NORTH
AMERICAN
NORTH
AMERICAN
NORTH
AMERICAN
EU
MK/WALL
EU
28