Table of Contents
Advertisement
Display
1
Press the
button in the navigation panel at the top of the screen to open the
Display
screen.
Display
Status
Network
Sleep Timer
2
3
4
Minutes
On
Off
Figure 11.
Display Screen
The
Display
screen allows you to set the
, and
LCD
Brightness
Wake on Motion
Sleep Timer — Toggle between
•
If the
Sleep Timer
is on, after a period of inactivity, the screen goes dark to save power
(
). Use the up and down arrows to set how long the period of inactivity should
Sleep mode
be. The value can be between
If the
is off, the panel does not enter sleep mode.
Sleep Timer
Auto Brightness — Toggle between
•
If
Brightness is on, the light sensor (see
Auto
amount of ambient light detected and automatically provides a suitable amount of screen
backlighting for the situation.
If
Brightness is off, the screen brightness is not affected by changes in the ambient
Auto
light.
LCD Brightness — Use the slider control to adjust the screen brightness between
•
.
100
Wake on Motion — Toggle between
•
in sleep mode.
If Wake on Motion is on, and the touchpanel is in sleep mode, any motion detected by the
B
motion sensor (
) wakes the panel from sleep mode. The screen lights and all buttons
become functional.
If Wake on Motion is off, the panel does not wake in response to nearby motion and the
touchpanel can be activated by pressing anywhere on the screen.
Configuring the Motion Sensor
B
The
(
) detects motion between three to five feet from the touchpanel, and at
Motion Sensor
least 15° from the center axis.
If the
has been set and no motion has been detected for a user‑defined
Sleep Timer
•
period of time, the touchpanel enters sleep mode.
If the
has not been set, the touchpanel does not enter sleep mode.
Sleep Timer
•
If
Motion has been set and motion is detected by the sensor while the screen is in
Wake on
•
sleep mode, the screen display is restored and active.
If
Wake on
Motion has not been set and the screen is in sleep mode, touch the screen to
•
restore it to an active state.
TLP Pro 525, 725, and 1025 Series Touchpanels • On-screen Menus
Audio
Advanced
Exit
Auto Brightness
On
Off
LCD Brightness
0
50
100
Wake on Motion
On
Off
Sleep Timer
,
Auto Brightness
.
On
and
Off
.
and
minutes.
1
120
and
.
On
Off
D
figure
2,
, on page 6) monitors the
and
. For this to work, the touchpanel must be
On
Off
Display
,
and
0
17
Advertisement
Table of Contents
