Selecting The Number Of Displayed Leads; Lead Group Selection - Innomed Medical HS112 C-1 User Manual

8.5. Selecting the number of displayed

Selecting the number of displayed leads

During monitoring, 3, 6, or 12 leads can be displayed. Switching between these options can During monitoring, 3, 6, or 12 leads can be displayed. Switching between these options can During monitoring, 3, 6, or 12 leads can be displayed. Switching between these options can
be done by pressing the
fingers. If you place two fingers (index and middle finger) on the upper mid part of the screen fingers. If you place two fingers (index and middle finger) on the upper mid part of the screen fingers. If you place two fingers (index and middle finger) on the upper mid part of the screen
with a 2–6 cm distance between them and swipe downward, the number of channels changes 6 cm distance between them and swipe downward, the number of channels changes 6 cm distance between them and swipe downward, the number of channels changes
following the order 12–6–3. If you place your fingers on the bottom of the screen and swipe
upward, the number of channels
button, the number of channels changes cyclically following an ascending (3–6–12–3...) button, the number of channels changes cyclically following an ascending ( button, the number of channels changes cyclically following an ascending (
order.
If the 3-channel display is chosen, a rhythm channel with a fixed 5 mm/s speed appears on the channel display is chosen, a rhythm channel with a fixed 5 mm/s speed appears on the channel display is chosen, a rhythm channel with a fixed 5 mm/s speed appears on the
bottom part of the screen. The displayed rhythm lead can be changed by a horizontal swipe bottom part of the screen. The displayed rhythm lead can be changed by a horizontal swipe bottom part of the screen. The displayed rhythm lead can be changed by a horizontal swipe
(leftward or rightward) on the rhythm curve with one finger. (leftward or rightward) on the rhythm curve with one
Selecting the number of the displayed leads is not allowed during printing. Selecting the number of the displayed leads is not allowed during printing.

8.6. Lead group selection

If the number of channels displayed is less than 12, the monitored lead group can be selected If the number of channels displayed is less than 12, the monitored lead group can be selected If the number of channels displayed is less than 12, the monitored lead group can be selected
using the button, or by swiping the screen horizonta button, or by swiping the screen horizontally with two fingers.
Place two fingers on the left part of the screen, one below the other, with a 2 Place two fingers on the left part of the screen, one below the other, with a 2 Place two fingers on the left part of the screen, one below the other, with a 2–5 cm distance
between them, and swipe the screen rightward with both fingers. This changes the displayed between them, and swipe the screen rightward with both fingers. This changes the displayed between them, and swipe the screen rightward with both fingers. This changes the displayed
leads in the 3 and 6 channel modes. Placing the fingers on the right part of the screen and leads in the 3 and 6 channel modes. Placing
swiping leftwards changes the lead groups in the reverse direction. With a 12 swiping leftwards changes the lead groups in the reverse direction. With a 12 swiping leftwards changes the lead groups in the reverse direction. With a 12-channel display,
this action has no effect.
Lead group selection during printing is not allowed. Lead group selection during printing is not allowed.
R-6730-EN02-E
HS112 C-1 User Manual
button, or swiping the screen in a vertical direction with two button, or swiping the screen in a vertical direction with two
3. If you place your fingers on the bottom of the screen and swipe 3. If you place your fingers on the bottom of the screen and swipe
channels changes following the order 3–6–12. By
selection
the fingers on the right part of the screen and
By pressing the
fingers.
23/73