Basic Parameter - Novatest ZBL-U5 Series Instruction Manual

Manual for ZBL-U5 series of Ultrasonic Detector
settings and return to main interface.。

5.2.1 Basic parameter

Basic parameter interface may be used to create new Project
name, Component name and Distance, as shown in Figure 5.2.
1. Create new project or select existing project
1） Create new project
Press New project button behind the list box of Project name to
pop up soft keyboard for inputting character, input project name to
create a subfolder with such name, all data files of tested piles will be
saved in this folder. When create a folder, if a folder with same project
name has existed, prompt of "This project has existed already, please
input the project name again" will pop up; select OK button to pop up
the project name input box requiring input project name again.
Figure 5.2 Parameter setup
76