Table of Contents
Advertisement
Manual for ZBL-U5 series of Ultrasonic Detector
【+】
【—】
【Delete】
【Tab】
【Save】
【Sample】
【Retest】
3.3.2 Using keyboard in dialog box
1）Press【Tab】key to switch the focus on controls;
2）When the focus is on an edit box, press 【OK】key to popup
a soft keyboard;
3）When the focus is on a button, press 【OK】key to confirm
the operation;
4）When the focus is on a drop list box, press 【 ,
key to select item from the list;
5）When the focus is on an edit box, press 【 ,
to move the cursor;
6）When the focus is on a radio, press【 ,
select item;
7）When the focus is on a check box, press 【OK】 key to select
or unselect the item;
8）When the focus is on a spin button, press【 , 】key to
adjust the item;
3.4 Soft keyboard
3.4.1 Character input
When need to input character (such as name of project or
Increase the gain
Decrease the gain
Delete characters or numbers before the cursor
when inputing characters or numbers
Switch areas or controls
Store the test data, and etc.
Start / stop signal acquisition.
Testing the saved test point again
24
,
, 】
,
, 】key
,
, 】key to
Advertisement
Table of Contents
