Manual for ZBL-U5 series of Ultrasonic Detector
2.
System time
It displays the current system time. Select the hours, minutes,
seconds and click the subsequent fine-tuning button, you can adjust
the time. The time is set with an immediate effect to modify the
current system time.
3.
Screen brightness
It can adjust the brightness of the LCD screen, with the range
between 10 to 100, and the default value is 100. Click the + and -
button, you can increase or decrease the brightness, each click
marking a change of 10.
3.11.2 Instrument parameters
Click on the Instrument tag and it then switches to the Properties
page, shown in Figure 3.14(a), you can set the Detection information
and instrument information.
Figure 3.13 System date settings
43