Manual for ZBL-U5 series of Ultrasonic Detector
instrument wireless MAC address)".
Login password is the password required to input when other
terminal units need to log in the WIFI LAN of current instrument, the
default is "zbl12345678".
Encryption is the way of encryption for login password, the
options include 4 types such as Open, WEP, WPA-PSK and
WPA2-PSK, the default is WPA2-PSK. In consideration of safety, it
is suggested to use WPA2-PSK.
Channel has 12 options from 1 to 12. It is used to set frequency
range for WIFI signal transmission; user may try to change this if
WIFI signal transmission is weak, the default is 1.
2.
File transmission setup
Upload management system is used to control instrument to
automatically upload new collected data to remote management
system. This function is valid only when used with the matching
management system from our company.
In order to make sure that test data could be transmitted to correct
server through Internet, must input correct FTP address (such as
202.106.63.52) and port number.
Note: In general, FTP and WIFI setting is only
required in the first operation, if there is no change after that,
setup is not necessary anymore.
3.12 Update of the software
The main function of this module is to automatically update all
software (listed in startup interface, such as startup interface and
update program) in instrument and relevant files.
After software in instrument has been updated, user may update
it by himself. Before update, user must obtain update program from
47