Parameter Setup; Basic Parameter - Novatest ZBL-U5 Series Instruction Manual

Manual for ZBL-U5 series of Ultrasonic Detector
creating a new object, the first default test is non-crack-across
data. Without non-crack-across data, the crack-across test
cannot be made.

7.2 Parameter setup

Press Setting button in the main interface of crack test to pop up
dialogue box as shown in Figure 7.2. To set more parameters, press
the Advanced button to enter into the advanced parameter setup
interface. Default of each parameter is the last saved value.
After set all parameters, press the OK button to validate all
settings. Writing the setting value of parameters into initialization files
and return to the main interface; press the Cancel button, and the
setting gets invalid and returns to the main interface.

7.2.1 Basic parameter

Parameters including Project name, Component name, Starting
point spacing and Step spacing can be set at the basic parameter
interface.
102