Table of Contents
Advertisement
Manual for ZBL-U5 series of Ultrasonic Detector
point, "*" will be displayed.
2.
Manual save/remove
The function is valid only when the current focal point is in the
Data list area and the current data is the crack-across data, and its
function is to set the Remove mark of the current test point as manual
save or manual remove. The removed test point will not attend the
average calculation to retain the average value of the crack depth
value of test points as the calculation depth of the crack.
concrete operation is: Press the Remove mark cell to pop out the
option to set Manual save/Remove and complete the setting by direct
selection.
7.5 Crack data list area
The Crack data list area mainly displays the basic information of all
cracks of current object, including serial number, name, crack-across
types and crack depth, as shown in Figure 7.5.
After pressing a data line, the selected crack will be set as the
current crack and the data of all its test points will be displayed in the
test point data list area.
Note: Moving upward and downward in the crack
data list area can flip over and display the page up and down.
7.6
Regression curve area
The Regression curve area mainly displays the "time-spacing"
Figure 7.5 Crack data list area
110
The
Advertisement
Table of Contents
