HIKVISION iDS-TCD403-BI User Manual page 15

Network Traffic Camera (for Traffic Flow Camera) User Manual
One coil for each lane.
Double Coil
Two coils for each lane.
6. Enable POS information.
1) Check Enable POS Information.
2) Enter X-Coord. and Y-Coord. of the POS information overlaid on the live view image.
3) Check the POS information to overlay on the live view image.
4) Optional: Click Quick Clear to refresh the POS information on the live view image.
7. Set the lane data collection parameters.
1) Click the lane No.
2) Check Enable POS of Lane to enable the POS information collection of the lane.
3) Enter Linked Lane No.
4) Select Lane Direction Type.
5) Optional: Check lane(s) to copy the parameters of the current lane to other lane(s).
8. Draw lane lines and virtual coil areas.
1) Click Draw Area.
2) Select the lane.
3) Select the default lane lines and right border line, and drag the two end points of the line or
drag the whole line to adjust its position according to the actual scene.
4) Optional: Click Draw Lane Line to restore to the default drawing.
5) Click Draw Virtual Coil A to draw the virtual coil areas.
Note
• Click the left button of the mouse to locate the vertexes of the virtual coil area on the live
view image, and click the right button of the mouse to finish the drawing.
• It is recommended to draw the virtual coil A at the position the distance from which to the
image lower edge is the length of two vehicles.
6) Click OK.
5