Network Traffic Camera (for Traffic Flow Camera) User Manual
Manual Switch
Scheduled Mode
No Switch
3. Click Save.
5.4 Set ROI
ROI (Region of Interest) encoding helps to assign more encoding resources to the region of
interest, thus to increase the quality of the ROI whereas the background information is less
focused.
Before You Start
Please check the video encoding type. ROI is supported when the video encoding type is H.264 or
H.265.
Steps
1. Go to Configuration → Device Configuration → Encoding and Storage → ROI .
2. Select Stream Type.
3. Set ROI region.
1) Check Enable.
2) Select Area No.
3) Click Draw Area.
4) Drag the mouse on the live view image to draw a fixed area.
Select Day/Night Mode to switch to the day or night manually.
Set day/night mode, start time, and end time to switch to ICR mode only
during the set time period.
Disable the ICR mode.
Figure 5-3 Set ROI
24