Chapter 9 Safety Management; Manage User; Enable User Lock - HIKVISION iDS-TCD403-BI User Manual

Network Traffic Camera (for Traffic Flow Camera) User Manual

9.1 Manage User

The administrator can add, modify, or delete other accounts, and grant different permissions to
different user levels.
Steps
1. Go to Configuration → Device Configuration → User Management .
2. Add a user.
1) Click Add.
2) Enter User Name and select Level.
3) Enter Admin Password, Password, and confirm the password.
Caution
To increase security of using the device on the network, please change the password of your
account regularly. Changing the password every 3 months is recommended. If the device is
used in high-risk environment, it is recommended that the password should be changed
every month or week.
4) Assign remote permission to users based on needs.
User
Users can be assigned permission of viewing live video and changing their own passwords,
but no permission for other operations.
Operator
Operators can be assigned all permission except for operations on the administrator and
creating accounts.
5) Click OK.
Note
The administrator can add up to 31 user accounts.
3. You can do the following operations.
- Select a user and click Modify to change the password and permission.
- Select a user and click Delete to delete the user.

9.2 Enable User Lock

To raise the data security, you are recommended to lock the current IP address.
Steps
1. Go to Configuration → Device Configuration → System → Service .
2. Check Enable User Lock.

Chapter 9 Safety Management

37