Chapter 1 Activation And Login; Activation; Default Information; Activate Via Sadp - HIKVISION iDS-TCD403-BI User Manual

Network Traffic Camera (for Traffic Flow Camera) User Manual

1.1 Activation

For the first-time access, you need to activate the device by setting an admin password. No
operation is allowed before activation. The device supports multiple activation methods, such as
activation via SADP software, web browser, and client software.
Note
Refer to the user manual of client software for the activation via client software.

1.1.1 Default Information

The device default information is shown as below.
• Default IP address: 192.168.1.64
• Default user name: admin

1.1.2 Activate via SADP

SADP is a tool to detect, activate, and modify the IP address of the device over the LAN.
Before You Start
• Get the SADP software from the supplied disk or the official website ( http://
www.hikvision.com/ ), and install it according to the prompts.
• The device and the computer that runs the SADP tool should belong to the same network
segment.
The following steps show how to activate one device and modify its IP address. For batch activation
and IP address modification, refer to User Manual of SADP for details.
Steps
1. Run the SADP software and search the online devices.
2. Find and select your device in online device list.
3. Enter a new password (admin password) and confirm the password.
Caution
STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of
your own choosing (using a minimum of 8 characters, including upper case letters, lower case
letters, numbers, and special characters) in order to increase the security of your product. And
we recommend you reset your password regularly, especially in the high security system,
resetting the password monthly or weekly can better protect your product.

Chapter 1 Activation and Login

1