Upgrade; Reboot; Restore Parameters - HIKVISION iDS-TCD403-BI User Manual

Network Traffic Camera (for Traffic Flow Camera) User Manual
The matched log files will be displayed on the log list.
4. Optional: Click Save Log to save the log files to your computer.

10.3 Upgrade

Upgrade the system when you need to update the device version.
Before You Start
Prepare the upgrade file.
Steps
1. Go to Configuration → Device Configuration → System Maintenance → Upgrade .
2. Click Browse to select the upgrade file.
3. Click Upgrade.
4. Click OK in the popup window.
Note
The upgrade process will take 1 to 10 minutes. Do not cut off the power supply.
Result
The device will reboot automatically after upgrade.

10.4 Reboot

When the device needs to be rebooted, reboot it via the software instead of cutting off the power
directly.
Steps
1. Go to Configuration → Device Configuration → System Maintenance → Reboot .
2. Click Reboot.
3. Click OK to reboot the device.

10.5 Restore Parameters

When the device is abnormal caused by the incorrect set parameters, you can restore the
parameters.
Steps
1. Go to Configuration → Device Configuration → System Maintenance → Default .
2. Select the restoration mode.
- Click Restore to restore the parameters except the IP parameters and user parameters to the
default settings.
- Click Restore Factory Settings to restore all the parameters to the factory settings.
41