Set Ddns - HIKVISION iDS-TCD403-BI User Manual

Network Traffic Camera (for Traffic Flow Camera) User Manual
2. Check Enable.
3. Select Protocol Version.
4. Enter Platform IP Address, Platform Port, and Camera No.
Note
The camera No. should be the same with the added one on the ISUP platform.
5. Optional: Enter Encryption Key if you select v5.0.
6. Click Save.
7. Optional: View Registration Status.
Note
When the registration status shows online, you can add or manage the device via the platform
software. Refer to its corresponding manual for details.

6.3 Set DDNS

You can use the Dynamic DNS (DDNS) for network access. The dynamic IP address of the device can
be mapped to a domain name resolution server to realize the network access via domain name.
Before You Start
• Register the domain name on the DDNS server.
• Set the LAN IP address, subnet mask, gateway, and DNS server parameters. Refer to "Set IP
Address" for details.
• Complete port mapping. The default port is 80, 8000, and 554.
Steps
1. Go to Configuration → Device Configuration → System → DDNS .
Figure 6-2 Connect to ISUP Platform
29