Wall Mount Plate Mounting - Planet IGS-10020 Series User Manual

L2+ multi-port full gigabit managed ethernet switch

Hide thumbs Also See for IGS-10020 Series:

Table of Contents

User's Manual

2.2.3 Wall Mount Plate Mounting

To install the Industrial Managed Switch on the wall, please follow the instructions below.

Follow all the DIN-rail installation steps as shown in the example.

Step 1: Remove the DIN-rail from the Industrial Managed Switch. Use the screwdriver to loosen the screws to remove the

Step 2: Place the wall-mount plate on the rear panel of the Industrial Managed Switch.

Step 3: Use the screwdriver to screw the wall mount plate on the Industrial Managed Switch.

Step 4: Use the hook holes at the corners of the wall mount plate to hang the Industrial Managed Switch on the wall.

Step 5: To remove the wall mount plate, reverse the steps above.