Planet IGS-10020 Series User Manual page 77

L2+ multi-port full gigabit managed ethernet switch
Hide thumbs Also See for IGS-10020 Series:
Table of Contents

Advertisement

DNS Proxy
IP Address
Delete
VLAN
IPv4
DHCP
IPv4
IPv6
IP Routes
Delete
Network
Mask Length
Gateway
Next Hop VLAN
Buttons
: Click to add a new IP interface. A maximum of 128 interfaces is supported.
: Click to add a new IP route. A maximum of 32 routes is supported.
: Click to apply changes.
: Click to undo any changes made locally and revert to previously saved values.
 From this DHCP interface
Specify from which DHCP-enabled interface a provided DNS server
should be preferred.
When DNS proxy is enabled, system will relay DNS requests to the
currently configured DNS server, and reply as a DNS resolver to the client
devices on the network.
Select this option to delete an existing IP interface.
The VLAN associated with the IP interface. Only ports in this VLAN will be
able to access the IP interface. This field is only available for input when
creating an new interface.
Enable the DHCP client by checking this box.
Enabled
The number of seconds for trying to obtain a DHCP lease.
Fallback
For DHCP interfaces with an active lease, this column shows the current
Current Lease
interface address, as provided by the DHCP server.
Provide the IP address of this Industrial Managed Switch in dotted
Address
decimal notation.
The IPv4 network mask, in number of bits (prefix length). Valid values are
Mask Length
between 0 and 30 bits for an IPv4 address.
Provide the IP address of this Industrial Managed Switch. An IPv6
Address
address is in 128-bit records represented as eight fields of up to four
hexadecimal digits with a colon separating each field (:).
The IPv6 network mask, in number of bits (prefix length). Valid values are
Mask Length
between 1 and 128 bits for an IPv6 address.
Select this option to delete an existing IP route.
The destination IP network or host address of this route. Valid format is
dotted decimal notationor a valid IPv6 notation. A default route can use
the value 0.0.0.0or IPv6 :: notation.
The destination IP network or host mask, in number of bits (prefix length).
The IP address of the IP gateway. Valid format is dotted decimal notation
or a valid IPv6 notation. Gateway and Network must be of the same type.
The VLAN ID (VID) of the specific IPv6 interface associated with the
gateway.
77
User's Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Igs-10080mftIgs-12040mtIgs-20040mtIgs-20160hpt

Table of Contents