4.17 Loop Protection
This chapter describes enabling loop protection function that provides loop protection to prevent broadcast loops in Industrial
Managed Switch.
4.17.1 Configuration
This page allows the user to inspect the current Loop Protection configurations, and possibly change them as well; screen in
Figure 4-17-1
appears.
The page includes the following fields:
General Settings
Object
•
Enable Loop
Protection
• Transmission Time
•
Shutdown Time
Figure 4-17-1: Loop Protection Configuration page Screenshot
Description
Controls whether loop protections is enabled (as a whole).
The interval between each loop protection PDU sent on each port. valid values
are 1 to 10 seconds.
The period (in seconds) for which a port will be kept disabled in the event of a
loop is detected (and the port action shuts down the port). Valid values are 0 to
354
User's Manual