Dscp Classification - Planet IGS-10020 Series User Manual

• Classify
• Egress
•
Remap DP0
•
Remap DP1
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.

4.9.10 DSCP Classification

This page allows you to map DSCP value to a QoS Class and DPL value. The DSCP Classification screen in
appears.
Click to enable Classification at Ingress side.
There are the following configurable parameters for Egress side –
Remap DP0 Controls the remapping for frames with DP level 0.
Remap DP1 Controls the remapping for frames with DP level 1.
Select the DSCP value from select menu to which you want to remap. DSCP
value ranges form 0 to 63.
Select the DSCP value from select menu to which you want to remap. DSCP
value ranges form 0 to 63.
Figure 4-9-11: DSCP Classification page Screenshot
221
User's Manual
Figure 4-9-11