Appendix: Wall-mount and Chassis
This part describes how to install your VDSL2 Bridge and make
connections to it.
Please read the following topics and perform the procedures in
the order being presented.
Wall-mount Installation
Step 1: Please find the wall that can mount the VC-234G/
VC-231G
Step 2: Screw two screws on the wall.
Step 3: Hang the VC-234G/VC-231G on the screws from the
wall.
Step 4: Repeat Step 5 of Desktop Installation for power supply
to the VC-234G/VC-231G
Before mounting the device to the wall, please
check the location of the electrical outlet and the
length of the Ethernet cable.
Note
30
Installation
Ø7mm
Ø2mm
VC-231G Switch Bottom Side