Planet IGS-10020 Series User Manual page 243

• DIP Address
• DIP Mask

IPv6 Parameters
Object
•
Next Header Filter
•
Next Header Value
•
SIP Filter
• SIP Address
• SIP BitMask
Any: No destination IP filter is specified. (Destination IP filter is
■
"don't-care".)
Host: Destination IP filter is set to Host. Specify the destination IP address
■
in the DIP Address field that appears.
Network: Destination IP filter is set to Network. Specify the destination IP
■
address and destination IP mask in the DIP Address and DIP Mask fields
that appear.
When "Host" or "Network" is selected for the destination IP filter, you can enter a
specific DIP address in dotted decimal notation.
When "Network" is selected for the destination IP filter, you can enter a specific
DIP mask in dotted decimal notation.
Description
Specify the IPv6 next header filter for this ACE.
Any: No IPv6 next header filter is specified ("don't-care").
■
Specific: If you want to filter a specific IPv6 next header filter with this
■
ACE, choose this value. A field for entering an IPv6 next header filter
appears.
ICMP: Select ICMP to filter IPv6 ICMP protocol frames. Extra fields for
■
defining ICMP parameters will appear. These fields are explained later in
this help file.
UDP: Select UDP to filter IPv6 UDP protocol frames. Extra fields for
■
defining UDP parameters will appear. These fields are explained later in
this help file.
TCP: Select TCP to filter IPv6 TCP protocol frames. Extra fields for defining
■
TCP parameters will appear. These fields are explained later in this help
file.
When "Specific" is selected for the IPv6 next header value, you can enter a
specific value. The allowed range is 0 to 255. A frame that hits this ACE matches
this IPv6 protocol value.
Specify the source IPv6 filter for this ACE.
Any: No source IPv6 filter is specified. (Source IPv6 filter is "don't-care".)
■
Specific: Source IPv6 filter is set to Network. Specify the source IPv6
■
address and source IPv6 mask in the SIP Address fields that appear.
When "Specific" is selected for the source IPv6 filter, you can enter a specific
SIPv6 address. The field only supported last 32 bits for IPv6 address.
When "Specific" is selected for the source IPv6 filter, you can enter a specific
SIPv6 mask. The field only supported last 32 bits for IPv6 address. Notice the
243
User's Manual