Hardware Installation; Wall-Mount Installation - Planet WGR-500 Quick Installation Quide

Industrial wall-mount gigabit ethernet router

Table of Contents

4. Hardware Installation

To install the Industrial Router on the wall, simply follow the following steps:

Step 1: There are 4 holes with 8mm diameter on the wall mount bracket of the

Industrial Router; the distance between the 2 holes is 165mm of WGR-

500-4PV and WGR-500-4P, 133mm of WGR-500, and the line through

them must be horizontal.

Step 2: Install a conductor pipe inside the board hole and flush the edge of the

conductor pipe with the wall surface.

Ø4mm

Ø8mm

165mm

Figure 4-1: Getting mounting holes aligned

Ø4mm

Ø8mm

133mm

Figure 4-2: Getting mounting holes aligned

Table of Contents

Wgr-500-4-pv Wgr-500-4p