Led Indications - Planet IGS-10020 Series User Manual

Reset Button Pressed and Released
< 5 sec: System Reboot
> 5 sec: Factory Default

2.1.3 LED Indications

IGS-10020MT
 System
LED Color
P1 Green
P2 Green
Fault Green
On
Ring
Off
Green
R.O.
Off
 Per 10/100/1000BASE-T Port
LED Color
LNK/ACT Green
1000 Orange
Function
Reboot the Industrial Managed Switch.
Reset the Industrial Managed Switch to Factory Default
configuration. The Industrial Managed Switch will then reboot
and load the default settings as shown below:
。
。
。
。
。
Indicates power 1 has power.
Indicates power 2 has power.
Indicates either power 1 or power 2 has no power.
Indicates the ERPS Ring has been created successfully.
Indicates the ERPS Ring hasn't been created.
Indicates the Ring Owner has been enabled.
Indicates the Ring Owner hasn't been enabled.
Lights Indicates the link through that port is successfully established.
Indicates that the Switch is actively sending or receiving data over that
Blinks
port.
Indicates that the port is successfully connecting to the network at
Lights
1000Mbps.
Indicates that the port is successfully connecting to the network at
Off
10Mbps or 100Mbps.
Default Username: admin
Default Password: admin
Default IP address: 192.168.0.100
Subnet mask: 255.255.255.0
Default Gateway: 192.168.0.254
Function
Function
41
User's Manual