Planet IGS-4215-16T2S Quick Installation Manual
  1. Manuals
  2. Brands
  3. Planet Manuals
  4. Network Router
  5. IGS-4215-16T2S
  6. Quick installation manual

Planet IGS-4215-16T2S Quick Installation Manual

Industrial 16-port 10/100/1000t + 2-port 100/1000x sfp managed gigabit ethernet switch
Hide thumbs Also See for IGS-4215-16T2S:
Table of Contents

Advertisement

Quick Links

Download this manual
Industrial 16-Port 10/100/1000T + 2-Port 100/1000X SFP
Managed Gigabit Ethernet Switch
IGS-4215-16T2S
Quick Installation Guide

Advertisement

Table of Contents
loading

Related Manuals for Planet IGS-4215-16T2S

Summary of Contents for Planet IGS-4215-16T2S

  • Page 1 Industrial 16-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Gigabit Ethernet Switch IGS-4215-16T2S Quick Installation Guide...

  • Page 2: Table Of Contents

    Table of Contents 1. Package Contents ..................3 2. Requirements ..................... 4 3. Wiring the Power Inputs ................5 4. Terminal Setup ................... 6 4.1 Logging on to the Console..............7 4.2 Configuring IP Address via the Console ..........8 4.3 Storing Current Switch Configuration ............. 9 5. Starting Web Management .................10 5.1 Logging in to the Industrial Managed Switch .........11 5.2 Saving Configuration via the Web ............13 6. Recovering Back to Default Configuration .............14...

  • Page 3: Package Contents

    1. Package Contents Thank you for purchasing PLANET Industrial L2/L4 Managed Gigabit Ethernet Switch, IGS-4215-16T2S. “Industrial Managed Switch” mentioned in this Quick Installation Guide refers to the IGS-4215-16T2S. Open the box of the Industrial Managed Switch and carefully unpack it. The box should contain the following items: Industrial Managed Quick Installation...

  • Page 4: Requirements

    2. Requirements The Industrial Managed Switch provides local and remote login interface for management purposes. The following equipment is necessary for further management: z Workstations running Windows XP/2003/Vista/7/8/10/2008/10, MAC OS X or later, Linux, UNIX, or other platforms are compatible with TCP/IP protocols. z Serial Port Connection (Terminal)  The above Workstations come with COM Port (DB9) or USB-to-RS232 converter.

  • Page 5: Wiring The Power Inputs

    Figure 3-1: Industrial Managed Switch Inlet Power Socket 2. Tighten the wire-clamp screws for preventing the wires from loosening. Power 1 Power 2 The wire gauge for the terminal block should be in the range from 12 to 24 AWG. Please check the wire AWG Ampere specification before connecting Note PLANET Industrial Managed Switch. The power input range is DC 12~48V and supports AC 24V. Note...

  • Page 6: Terminal Setup

    4. Terminal Setup To configure the system, connect a serial cable to a COM port on a PC or notebook computer and to the RJ45 type serial (console) port of the Industrial Managed Switch. PC / Workstation with Terminal Emulation Software Managed Switch RS232 to RJ45 Cable Serial Port RJ45 Console Port Figure 4-1: Industrial Managed Switch Console Connectivity A terminal program is required to make the software connection to the Industrial Managed Switch.

  • Page 7: Logging On To The Console

    4.1 Logging on to the Console Once the terminal has been connected to the device, power on the Industrial Managed Switch and the terminal will display “running testing procedures”. Then, the following message asks to login user name and password. The factory default user name and password are shown as follows, and the login screen in Figure 4-1 appears.

  • Page 8: Configuring Ip Address Via The Console

    Figure 4-2: IP Information Screen  Configuration of the IP address 1. At the “IGS-4215-16T2S #” prompt, enter “configure”. 2. At the “IGS-4215-16T2S (config)#” prompt, enter the following command and press <Enter> as shown in Figure 4-3. IGS-4215-16T2S (config)# ip address 192.168.1.100 mask 255.255.255.0 IGS-4215-16T2S (config)# ip default-gateway 192.168.1.254 The previous command would apply the following settings for the Industrial Managed Switch.

  • Page 9: Storing Current Switch Configuration

    If the IP is successfully configured, the Industrial Managed Switch will apply the new IP address setting immediately. You can access the Web interface of the Industrial Managed Switch through the new IP address. 4.3 Storing Current Switch Configuration At the “IGS-4215-16T2S#” prompt, enter “copy running-config startup-config” as shown in Figure 4-4. Figure 4-4: Saving current Configuration Command Screen If you are not familiar with console command or the related param- eter, enter “?” anytime in console to get the help description.

  • Page 10: Starting Web Management

    5. Starting Web Management The following shows how to start up the Web Management of the Industrial Managed Switch. Note the Industrial Managed Switch is configured through an Ethernet connection. Please make sure the manager PC must be set to the same IP subnet address.

  • Page 11: Logging In To The Industrial Managed Switch

    5.1 Logging in to the Industrial Managed Switch 1. Use Internet Explorer 8.0 or above Web browser and enter IP address https://192.168.0.100 to access the Web interface. 2. When the following dialog box appears, please enter the default user name and password “admin”. The login screen in Figure 5-2 appears. Default IP Address: 192.168.0.100 Default Username: admin Default Password: admin Figure 5-2: Web Login Screen 3. After entering the username and password, the main screen appears as Figure 5-3 shows.
  • Page 12 The Switch Menu on the left of the Web page lets you access all the commands and statistics the Industrial Managed Switch provides. Figure 5-4: Switch Menu Now, you can use the Web management interface to continue the Switch management. Please refer to the user’s manual for more.

  • Page 13: Saving Configuration Via The Web

    5.2 Saving Configuration via the Web To save all applied changes and set the current configuration as a startup configuration, the startup-configuration file will be loaded automatically across a system reboot. 1. Click “Save > Save Configurations to FLASH” to log in to the “Configuration Manager” page.

  • Page 14: Recovering Back To Default Configuration

    10 seconds. After the device is rebooted, you can log in the management Web interface within the same subnet of 192.168.0.xx. Fault 1000 10/100 LNK 1000 LNK/ACT 100 LNK/ACT Console 115200,N,8,1 Reset Button IGS-4215-16T2S Reset Figure 6-1: IGS-4215-16T2S Reset Button...

  • Page 15: Customer Support

    7. Customer Support Thank you for purchasing PLANET products. You can browse our online FAQ resource and User’s Manual on PLANET Web site first to check if it could solve your issue. If you need more support information, please contact PLANET switch support team. PLANET online FAQs: https://www.planet.com.tw/en/support/faq Switch support team mail address: support@planet.com.tw IGS-4215 Series User’s Manual: https://www.planet.com.tw/en/support/download. php?&method=keyword&keyword=IGS-4215&view=3#list (Please select your switch model name from the Product Model drop-down menu) Copyright © PLANET Technology Corp. 2019. Contents are subject to revision without prior notice.

Table of Contents