Power Over Ethernet Configuration - Planet IGS-10020 Series User Manual

Class Usage
Default
0
Optional
1
Optional
2
Optional
3
Optional
4

Allocation mode
In this mode the user allocates the amount of power that each port may reserve. The allocated/reserved power for each
port/PD is specified in the Maximum Power fields. The ports are shut down when total reserved powered exceeds the
amount of power that the power supply can deliver.
In this mode the port power will not be turned on if the PD requests more available power.

LLDP mode
In this mode the ports of PoE power are managed and determined by LLDP Media Protocol.

4.16.3 Power Over Ethernet Configuration

This section allows the user to inspect and configure the current PoE configuration settings
Range of maximum power used by the PD
0.44 to 12.95 watts
0.44 to 3.84 watts
3.84 to 6.49 watts
6.49 to 12.95 watts (or to 15.4 watts)
12.95 to 25.50 watts (or to 30.8 watts)
Figure 4-16-2: PoE Configuration Screenshot
343
User's Manual
Class Description
Classification unimplement
Very low power
Low power
Mid power
High power
, as Figure 4-16-2 appears.